© Copyright Qvis ®. All documentation rights reserved.
53
3.15 PATTERN TOUR
The dome supports 4 pattern tours and each
pattern provides a maximum of 10 Minutes of
500 commands. Please check the following
steps to set up a pattern.
1)
PATTERN NO.:
Move the cursor here and
click IRIS + to enter the setup of Pattern
Number. Click the up or down button to
select a pattern number (14) and click
IRIS + to confirm.
2)
TITLE:
Move the cursor here and click
IRIS + to enter the setup of Pattern
Title .Check the detailed above in DOME
TITLE settings.
3)
<SET>:
Move the cursor here and click
IRIS + to enter. Click the dome
up/down/left/right, make the zoom in/out
and click IRIS + to save the pattern tour.
4)
START:
Move the cursor here and click
IRIS + to start the current pattern tour.
5)
DELETE:
Move the cursor here and click
IRIS + to delete the current pattern tour.
LANGUAGE: ENGLISH
INFORMATION
DOME SETTINGS
[MOTION]
RESTART
FACTORY DEFAULT
EXIT
MAIN MENU
PRESET
SCAN
SEQUENCE
[PATTERN]
AUTO TRACKING
BACK EXIT
MOTION
PATTERN NO. : 1
TITLE: PATTERN 1
START
< SET>
DELETE
BACK EXIT
PATTERN
