© Copyright Qvis ®. All documentation rights reserved.
35
Storage
→ Record Schedule
Tick the
‘Enable Record Schedule’, then click ‘Editor’ button to edit the
record schedule. Appoint record period(s) and the choose record type.
See picture 2.2.5-36. For edit schedule, see picture 2.2.5-37.
Record time includes
‘All day’ and ‘Section’. If user chooses ‘Section’
the user is able to choose a specific time period. Supports up to 4
record period settings.
Record types include:
‘Timing’, ‘Motion Detection’, ‘Alarm’, ‘Motion Or
Alarm
’, ‘Motion and Alarm’, ‘Other’.
Pre-record is the advanced pre-record time before starting of record,
0-3sec (optional).
Post-record is the delayed continued time of recording, 5sec-10min
(optional).
After modifying related parameters, click
‘Confirm’ to save settings.
Note: Overwrite is measured according to 2Mbps, the bigger
stream you choose, the shorter the pre-record time is.
Picture 2.2.5-36 Record schedule
