QuickShow FB3-QS, Руководство пользователя, Страница: 72 / 110

In the Second page of the Cue Properties window, you will find image-related properties. The second
page of the Cue Properties window is shown and described in the picture below.
Animation type
If the cue contains an animation (i.e. a frame file with more than one frame), there are three ways in
which QuickShow can animate that frame file.
Refresh-based animation (provides the smoothest animation for long frame files, but is often
too fast for simple animations with only a few frames)
Time-based animation (the most common type of animation -- used with most cues)
Beat-based animation (allows you to control the animation based on the Beat system. This is
very handy for visuals that go to the beat of the music.)
Scan rate and optimization settings
The lower portion of the Cue Properties window allows you to control the scan rate of the cue, as well
as accessing more advanced optimization settings. Most users can simply leave this set to 100% of the
base scan rate as shown above.
Preventing cues from being rerouted
It is possible to use the Laser Preview window as a means of directing cues to projection zones other
than those already specified by the cue itself. However, individual cues may prevent rerouting by
checking a box on the General tab.
72