QuickShow FB3-QS, Руководство пользователя

Страница: 65 / 110

Displaying the static or sequenced DMX momentarily
To send the output of the QuickDMX tool to the DMX output device, simply click on the Show it now
button. If the Play button is pressed in the QuickDMX window, the DMX sequence will be output to the
device. If the Stop button is pressed, only the selected step will be output.
Saving the QuickDMX to a cue
You can save the QuickDMX sequence to a cue for permanent storage or for use later. Simply drag and
drop the preview window (or the QuickDMX tab itself) to a cue.
Changing the name of DMX channels
You can give each channel a different name by clicking the right mouse button on the label below the
slider, and entering a name.
Changing the color and control type
You can change the color of each slider by right-clicking on the slider itself, and then choosing a color in
the menu. If you have a DMX fixture that uses six channels, you can make the six sliders that control
that fixture all the same color, thus helping you to identify which sliders correspond to the fixture.
You can also designate a channel as requiring stepped change or smooth change. For example, certain
lighting fixtures have control channels which require absolute values to be presented, while other
channels that control the pan, tilt, and brightness would desire a smooth change. This too can be
specified.
65