Attach the vertical fin using
one c-clamp and (2) M3x14
cap head screws.
Section 10 – Linkage Rod Installation
Parts List
M2x8 Pan head screws x 8
Shim ball x 8
M2.3x35mm Linkage Rod x 2
M2.3x50mm Linkage Rod x 4
M2.3x20mm Linkage Rod x 2
2.3mm Ball end, Medium x 8
Tail Rotor Pushrod guide set. (Clips,
two inner sleeves (2))
2.3mm Ball end, Long x 10
Double Link x 2
Canopy
Rubber grommets x 4
M3x14
Cap head screws x 4
Stainless rudder control rod end x 2
M3x14 Cap head screw x 40
M3 Locknut x 40
Attach each servo using (4) M3x14 Cap head screws and (4) M3 Locknuts. Look at the
pictures that follow for the proper servo orientation.
