OEM/Integrators Installation Manual
Important Notice to OEM integrators 1. This module is limited to OEM installation
ONLY. 2. This module is limited to installation in mobile or fixed applications,
according to Part 2.1091(b). 3. The separate approval is required for all other
operating configurations, including portable configurations with respect to Part 2.1093
and different antenna configurations 4. For FCC Part 15.31 (h) and (k): The host
manufacturer is responsible for additional testing to verify compliance as a composite
system. When testing the host device for compliance with Part 15 Subpart B, the host
manufacturer is required to show compliance with Part 15 Subpart B while the
transmitter module(s) are installed and operating. The modules should be
transmitting and the evaluation should confirm that the module's intentional
emissions are compliant (i.e. fundamental and out of band emissions). The host
manufacturer must verify that there are no additional unintentional emissions other
than what is permitted in Part 15 Subpart B or emissions are complaint with the
transmitter(s) rule(s). The Grantee will provide guidance to the host manufacturer for
Part 15 B requirements if needed.
Important Note
notice that any deviation(s) from the defined parameters of the antenna trace, as
described by the instructions, require that the host product manufacturer must notify
to Quectel that they wish to change the antenna trace design. In this case, a Class II
permissive change application is required to be filed by the USI, or the host
manufacturer can take responsibility through the change in FCC ID (new application)
procedure followed by a Class II permissive change application
End Product Labeling
When the module is installed in the host device, the FCC/IC ID label must be visible
through a window on the final device or it must be visible when an access panel, door
or cover is easily re-moved. If not, a second label must be placed on the outside of
the final device that contains the following text: “Contains FCC ID:
XMR2023EM160RGL” “Contains IC: 10224A-2020EM160GL”. The FCC ID/IC ID can
