Quatech Serial Device Server, Руководство пользователя

Страница: 50 / 98

Installing the device drivers Quatech SDS User’s Manual
Figure 41 - Network Connectivity Test Failed screen
Figure 42 displays when the
IP connection test fails. It
presents you with these three
options:
¾
Change the SDS’ IP
configuration and retest
¾
Move the SDS to a
different location and retest
¾
Ignore the problem and
continue installing
Step Procedure Description
Step 55 Select one of the following options:
¾
Correct the SDS network
configuration and retest. Press Next to
continue .
¾
Move the SDS to a different subnet
and retest. Press Next to continue .
¾
Ignore the problem and continue
installation. Press Next to continue .
Click Back to retest current configuration.
If you are not sure of the configuration
parameters, consult your system
administrator. The Internet Protocol
(TCP/IP) Properties dialog box displays.
Go to □ Step 32.
Check with your system administrator
for the subnet address. The Locate the
Serial Device Server on remote subnet
screen displays. Go to □ Step 45 .
The TCP/IP Network Configuration
Parameters screen displays.
Go to □ Step 16 .
Page 44 940-0183-153 July 2005