Quark-elec Manual
https://www.quark-elec.com
19 of 28
2018
V3
11.4.Check relay working mode
G031 has three individual relays which support two working modes, self-lock and latching control. When
working in latching mode, the relay will action a command from a user determined amount of time (depending
on the time setting on the jumpers on the board. See chapter 11.4) and then reverts back to the previous
state. When working in self locking mode, the relay will stay active until the next command is received. The
G031 can also report the relay working status And check the temperature for each sensor via the app.
Relay working mode:
This will inform the user which
relays
are
in self-lock or latching mode. This is for relays 1 and 2
Relay working status:
This tells the users which relays are on/off
(if wired in the normal open position)
Temperature:
This tells the user the temperature ranges for each
relay and whether the temperature sensor is enabled or disabled
for that relay.
11.5.Rename control terminals
The control terminals can be renamed as a meaningful name. For example ‘Heater’ or ‘fan’.
Relays 1, 2 and 3
: Click the white box of the relay or switch that
you would like to rename. You will receive a pop-up in your
mobile to change the name. Type in the new name and click
enter.
RF switch 1, 2, 3 and 4:
The RF switch option has been
discontinued and is there for customers who still have RF
switches.
