Quark-elec Manual
https://www.quark-elec.com
18 of 28
2018
V3
11.2.Register SIM cards
G031 allows one mobile phone to function as the main controller and up to 3 additional phones to function as
control terminals. The following interface allows the operator to register, delete and check the SIM card
numbers:
Register myself as main SIM card
: When starting the G031 for
the first time you will need to add the main controller SIM number
to the device. Do this by entering the mobile number you would
like to be the main controller or ‘
click register myself as main
SIM card’
. There must always be a main controller for each
device.
You will have ten minutes to register the main controller SIM
once you power up the G031. If not repower the device and
retry.
Register 1st, 2nd, 3rd additional SIM card:
click this button to
register additional SIM cards. These additional SIM numbers are
authorized to control the G031
Check registered SIM numbers:
this will give the user a list of
the telephone numbers that are authorized t control the G031
Replace the main SIM numbers:
this allows for the main
controller SIM to be reset. Once this message is received by the
G031, the user will have 10 minutes to register the main SIM.
11.3.Setting the clock on the QK controller
G031 can automatically execute actions at the time set by the operator. To do this, the real time clock on the
G031 controller must be set. This page allows the operator to check and set the time on G031 internal clock.
Set clock on QK controller:
To set the time on the G031 enter
the current time in the white box. The time format is 24hour (i.e.
11.55.00). When complete click submit to set this as the G031’s
time.
Check the clock on QK controller:
To request the time on the
G031, click request at the top of the page. This will send a
message saying the time relative to the G031’
s internal clock.
