Quark-elec Manual
https://www.quark-elec.com
20 of 28
2018
V3
11.6.Control panel
The control panel provides the main operating interface for turning relays on and off and setting timers. By
clicking ‘
ON’
in the app, a message will be sent to the G031 turning the specific relay on. This is the same for
the ‘
OFF
’ button.
Relay 1, 2 and 3 on/off:
clicking ‘
on
’ button will send a message
to the G031 controller to turn the relay into the
normal open
position. You must wait for the command to be received before
issuing another command to the controller. The
‘off’
button
operates the relay to the normal closed position.
Relay 1 and 2 Timer:
only relays one and two have timer
functionality. See next step for timer instructions.
Relay timer settings:
set the time at which you would like the
relay to turn on and off. This is a 24 hour format (i.e. 13.55.00)
Relay timer set checking:
Check the current setting of the timer
Relay timer reset:
Switches off the Timer setting. This does not
affect the internal clock.
