Quark-elec Manual
https://www.quark-elec.com
21 of 28
2018
V3
11.7.Alarm log
The alarm log page will show all the alarm alerts and when they were activated. The app will store these logs
within your mobile device.
Alarm log:
once alarms have been triggered this page will
become populated with your alarm trigger times.
11.8.Other
The ‘
other
’ Tab within the app gives you controls for setting small delay timers, disabling alarms and there
inputs. This can also be used for setting the temperature values of the relays and resetting alarms.
Reset external alarm:
It will reset the alarm input allowing a
command to be received by the G031. This command will usually
be followed by either ‘
Disable alarm input’
or ‘
relay off’
command
Disable alarm input:
this will disable the alarm input of the
chosen relay (relays 1 and 2)
Enable alarm input:
this will enable the alarm input of the chosen
relay (relays 1 and 2)
.
Setting temperature values:
input the on and off temperature for
the chosen temperature sensor. The chosen Relay will action
depending on the temperature chosen either switch on or off
Temperature sensor on/off:
This function allows users to disable
the temperature sensors from taking readings. The format for this
command is 3 numbers. Enter either a
1
for temperature sensor
enabled
, or
0
for temperature sensor
disabled.
To turn sensor 1
off and the other 2 on would look like
011.
