Starting the Scalar 10K
3-7
September 2007
Starting the Scalar 10K
Use the following procedure to start the Scalar 10K.
With the RMU installed, power up must be delayed by one
minute after a power down condition to allow the RMU to
properly reset.
Step 1
Make sure that all doors are closed and
mechanically locked on the Control Module (CM),
Accessor Module (AM), and Expansion Modules
(EMs).
Step 2
Locate the Power Switch at the lower right corner of
the DM door.
Step 3
Set the Power Switch on the DM to on.
Step 4
Repeat the process for each DM.
Step 5
Locate the Main Power Switch at the lower right
corner of the CM service door.
Step 6
Set the Main Power Switch on the CM to on.
Text appears on the operator panel.
If text does not appear, power cycle the AC power or
check the library fuse or circuit breaker.
Movements of mechanical components in the library can
cause serious injury. Before turning the Main Power Switch
on, confirm that no danger exists to personnel or property.
Look into the aisle to make sure there are no obstructions or
personnel present prior to applying library power.
Movements of mechanical components in the library can
cause serious injury.
Power is applied to the Scalar 10K. The CM embedded
software starts the boot process. The Power On indicator
illuminates and the Main Menu displays status.
After all firmware procedures complete, the LCD screen
on the operator panel displays the Main Screen.
See Figure 3-2 on page 3-8.
Caution
Warning
Warning
Содержание Scalar 10K
