Quantum PX720, Руководство пользователя

Страница: 106 / 259

Chapter 2 Basic Library Operations
Inserting Tape Cartridges into the Load Port
Quantum PX720 User’s Guide 83
2 Open the load port through the OCP load port screen (see Load Ports
Screen on page 72).
3 With the load port door open, place the tape cartridges in any
available load magazine slot.
The proper orientation for tape cartridge insertion is shown in
SDLT
Cartridges on page 44 and LTO Cartridges on page 45.
4 Manually close the load port door by pushing the load port assembly
into the cabinet. You will hear a “click” when it locks into position.
Removing/Installing
Removable Bin Packs
2
Both the left and right load ports on the front of the PX720 can have either
fixed or removable bin packs. These bin packs can support both SDLT
and LTO tape cartridges (see table 18 ).
Table 18 Load Port Bin Pack
Types
To remove/install a removable bin pack:
1 Press down on the bin pack handle to release bin pack from the load
port and tip the bin pack out of the load port (see figure 47 ).
Caution: Ensure the load port doors are open prior to unlocking
the load ports.
SDLT Fixed
Bin Packs LTO Fixed Bin
Packs
SDLT
Removable
Bin Packs LTO
Removable
Bin Packs
8 slots per pack
(2 on left load
port, 4 on right
load port)
9 slots per pack
(2 on left load
port, 4 on right
load port)
7 slots per pack
(2 on left load
port, 4 on right
load port)
8 slots per pack
(2 on left load
port, 4 on right
load port)