Preliminary
4-2
September 21, 1999
BENCHMARK
T A P E
S Y S T E M S
Your DLT7 Autoloader can operate in either Random-Access or Sequential-Access modes.
In Random-Access mode, your backup application controls cartridge management. In
Sequential-Mode, the DLT7 Autoloader firmware predefines cartridge management.
4.1.1.1
Rear Panel Connectors
The rear panel of your DLT7 Autoloader contains the SCSI interface and power connectors.
Connectors
AC Power
Connector
Connector for AC power cord.
Rear Panel
SCSI
Channel
Connectors
Connectors for the SCSI interface
cable that connects the autoloader
to the host server or workstation
and/or to other devices on the
SCSI bus. The interface cable can
be attached to either connector. If
your DLT7 Autoloader is the last
device on the SCSI bus, attach the
supplied terminator to the open
SCSI connector.
Table 5: DLT7 Autoloader Rear Panel Connectors
