Preliminary
2-6
September 21, 1999
BENCHMARK
T A P E
S Y S T E M S
6. Make sure the power switch on the rear panel of your DLT1 Desktop Drive is in the OFF
position. Attach the female connector on the power cable to the power connector on the
rear panel of the drive.
Use caution when plugging the power cord into an electrical outlet. Hazardous voltages
are present in the sockets of the outlet.
7. Plug in the power cable to a nearby power outlet.
Figure 2-4: Attach Terminator (optional), SCSI, and Power Cables to your Drive
8. Attach the power cables to the host server or workstation and all attached devices.
9. Turn on your DLT1 Desktop Drive.
10. Turn on the host server or workstation and allow its operating system to start.
Turn to page 2-15 to learn about your DLT1 Desktop Drive’s self-test and initialization
features.
Terminator
DLT1 SCSI Cable
Power Cable
