Preliminary
4-28
September 21, 1999
BENCHMARK
T A P E
S Y S T E M S
4.6.3.10 LOAD
FIRMWARE
This function allows you to upgrade the DLT7 Autoloader’s firmware via the SCSI bus.
Whenever new firmware for your DLT7 Autoloader is released, complete instructions on how
to use the
LOAD FIRMWARE
function to perform the upgrade is included on the firmware
diskette.
4.6.3.11 DISPLAY
COUNTS
The DLT Autoloader keeps track of how many times certain events have occurred. The
DSP
COUNTS
function displays these numbers.
1. After entering the
DIAG MENU
, press and hold the
MODE
button until
dSP COUNTS
appears on the LCD panel.
2. Press
the
SELECT
button to access the first event.
FRT PK (SEL)
appears on the LCD
panel.
3. Press
the
SELECT
button again. Your DLT7 Autoloader displays the number of times
that it has picked a cartridge from any of the front slots.
4. Press
the
NEXT
button to access the next event.
Your DLT7 Autoloader keeps track of the following events:
•
Front Pick Cartridge
•
Rear Pick Cartridge
•
Drive Pick Cartridge
•
Front Place Cartridge
•
Rear Place Cartridge
•
Drive Place Cartridge
•
Drive Door Retries
•
Front Pick Retries
•
Rear Pick Retries
•
Drive Pick Retries
•
Front Place Retries
•
Rear Place Retries
•
Drive Place Retries
Press the
SELECT
button when
dRV dR RE
is displayed to return your DLT7 Autoloader to
LdR REAdY
. Press the
MODE
button at any time to return your DLT7 Autoloader to
LdR
REAdY
.
