Preliminary
2-7
September 21, 1999
BENCHMARK
T A P E
S Y S T E M S
2.4
Installing your DLT1 Internal Drive
This section contains step-by-step instructions for installing your DLT1 internal drive.
2.4.1 Installation
Overview
Installing your DLT1 internal drive is fast and easy when you follow the instructions in this
section in the order presented. Installing your DLT1 internal drive consists of the following
steps:
1. Unpack and check your drive for shipping damage.
2. Select a server or workstation that is to be the host for your DLT1 internal drive.
3. Set the SCSI ID for your DLT1 internal drive.
4. Shut down and turn off the server or workstation that is to be the host for your DLT1
internal drive. Remove the power cable from the selected server or workstation. Turn off
and remove the power cables from all devices attached to the selected server or
workstation.
5. Remove the cover from the selected server or workstation as explained in the server’s or
workstation’s manuals.
6. Install a SCSI host adapter in the server or workstation that is to be the host for your
drive, if necessary.
7. Install your DLT1 internal drive in a full-height drive bay.
8. Attach the SCSI ribbon cable to your DLT1 internal drive and SCSI host adapter.
9. Attach a power cable to your DLT1 internal drive.
10. Secure your DLT1 internal drive in the selected server or workstation.
11. Check your DLT1 internal drive to make sure it is working properly.
Each of these steps is covered in the next few sections.
2.4.2 Unpacking your Drive
Before you begin, you need to clear a desk or table so that you can unpack your DLT1
internal drive.
2.4.2.1
Unpacking your Drive
Before you do anything else, unpack and inspect your DLT1 internal drive for shipping
damage. To do a thorough job, follow these steps:
1. Clear a table or desk so that you have room to unpack your drive.
2. Inspect the shipping box for damage. If you notice any damage, report it to the shipping
company immediately.
3. Open the shipping box and remove the SCSI cable and any other accessories.
4. Locate the anti-static wrist strap supplied with your drive.
