Quantum ATL PowerStor L200 Series, Руководство пользователя

Страница: 58 / 106

Chapter 3 Basic Library Operations
SCSI ID
42 ATL PowerStor L200 Series Library User’s Guide
SCSI ID
3
The
SCSI ID?
option displays the SCSI ID for all devices and allows
existing SCSI IDs to be changed.
Make sure all devices on the same SCSI bus have different SCSI ID
assignments. SCSI ID defaults are as follows:
•
library controller = SCSI ID 0
•
drive = SCSI ID 1.
Table 3-4 lists possible SCSI ID options and their respective messages.
Note: When changing a SCSI ID, wait at least 30 seconds before checking the
ID. The library may not show the changed ID until the tape drive has
been reset.
Table 7 SCSI ID options
Note: EEROM is maintained through power cycles. SCSI ID information that
is stored in non-volatile RAM is saved until you manually change it.
SCSI IDs do not automatically revert to their defaults.
Option Description Message Notes
View ID?
Lists the SCSI IDs for
the tape library and
drive
Lib 0 Drv 1
This example shows the library:
(Lib) = SCSI ID 0
(Drv) =SCSI ID 1
Set ID?
Select a device and
change the SCSI ID
setting.
Set ID?
The system is set to change the
device ID.
Set ID?
Drive?
displays the device ID to be
changed
Set ID?
Drive? #?
selects the device and
corresponding SCSI ID to be
changed
Set ID?
Library?
displays the library ID to be
changed
Set ID?
Library? #?
selects the library and
corresponding SCSI ID to be
changed