Quantum ATL PowerStor L200 Series, Руководство пользователя

Страница: 39 / 106

Chapter 2 Installing the Cartridge Tape Library
Configuring the Tape Library
ATL PowerStor L200 Series Library User’s Guide 23
Configuring the Tape Library
2
Configuration consists of verifying that the library and the internal
drive have the correct SCSI ID settings.
Figure 18 shows the location of the OCP on the front panel of the
library. Verify SCSI IDs using the OCP. If necessary, change the IDs.
Figure 18 Library Front
Panel
The system uses SCSI IDs to identify or address devices, such as the
loader controller and the tape drive on the SCSI bus.
If the library is one of multiple SCSI devices on the bus, be sure to use
a SCSI ID that is unique from any other device or system ID on the
SCSI bus. Default SCSI IDs are listed in table 2.
Table 2 SCSI ID Default
Settings
Note: Library power must be recycled for any SCSI ID change to take effect.
Checking the SCSI
Settings
2
To view the current SCSI ID settings:
SCSI ID Device
1 Tape Drive
0 Library Controller
OCP
LCD
Select
Enter
Previous
Next