Quantum ATL PowerStor L200 Series, Руководство пользователя

Страница: 61 / 106

Chapter 3 Basic Library Operations
Mode
ATL PowerStor L200 Series Library User’s Guide 45
Viewing a Mode
3
To view the current library modes:
Procedure
1
Press Select until
MODE?
is displayed.
2
Press Enter.
Random Selected
is displayed.
3
Press Next repeatedly.
Sequential
and
Sequential Circ
are
displayed.
4
Continue pressing Next.
Autoload Cartridge
,
Enable
Barcode
, and
Auto Clean
modes are displayed.
5
Press Select to return to the main menu.
Autoload
Cart
N
Y
Functions only in conjunction with Sequential or
Sequential Circular. When issued, the library will
load cartridges following an open door/close
operation.
The library must be either in the Sequential or
Sequential Circular mode for Autoload Cart mode to
be functional.
Enable
Barcode
Optional
N
Y
When enabled, the bar code reader scans cartridge
labels during library power up and when the door is
closed. The bar code labels can be read via the OCP
Status display or a SCSI Read Element status
command.
To use:
a
press Enter to
Enable Barcode: Y
b
make sure door is closed.
Auto Clean
No cart present
in slot 7
Data cart in
slot 7
Expired
cleaning cart in
slot 7
Valid cleaning
cart in slot 7
N
Y
CLN Slot
Empty!
NOT a CLN
Tape
CLN Tape
Expired
Completes
Successfully
When enabled, the library will automatically clean
drives when required.
The time that a SCSI Move Media command takes to
complete increases from approximately 20 seconds to
approximately 60 seconds because the library waits
until calibration is complete. If cleaning is required,
the typical time increases to a maximum of 10
minutes while the drive is cleaned.
To use:
a
load the cleaning tape in OCP slot 7
b
press Enter to
Enable Auto Clean:Y
.
Option Description Messages Notes