Quantum ACL 4/52, Руководство оператора

Страница: 53 / 68

Chapter 2 Operating Procedures
Operating Procedures Using the Menu Mode
ACL 4/52 Operator’s Guide 37
Adjusting the Display
Area Contrast
2
To adjust the display area contrast:
1 Enter the menu mode.
2 Press the SELECT button to choose the Configuration menu.
3 Verify the following is displayed in the SDA:
4 Use the
↓
button to bypass the Inquiry, SCSI Address , Power-Up
State
,
Auto Clean
,
Retries
,
Auto Load
and
Language
sub-menus
and verify the following is displayed in the SDA:
5 With
Set View
displayed on line #2 of the SDA, press the
SELECT
button and verify the following is displayed in the SDA:
Note: Contrast 5
is the default contrast setting. If you want to change the
contrast, proceed to step 6. Otherwise, exit the menu mode.
6 Use the
↑
and
↓
buttons to navigate to the desired contrast.
Contrast 9
Contrast 8
Contrast 7
Contrast 6
Contrast 5<
Contrast 4
Contrast 3
Contrast 2
Contrast 1
Exit
7 With the desired contrast displayed on line #2, press the SELECT
button.
8 Exit the menu mode.
Unloading a Drive
2
To unload a drive:
1 Enter the menu mode.
M e n u : C o n f i g u r a t i
I n q u i r y
M e n u : C o n f i g u r a t i
S e t V i e w
M e n u : S e t V i e w
C o n t r a s t 9