Quantum ACL 4/52, Руководство оператора

Страница: 50 / 68

Chapter 2 Operating Procedures
Operating Procedures Using the Menu Mode
34 ACL 4/52 Operator’s Guide
Enabling/Disabling the
Auto Clean Option
2
To enable or disable the auto clean option:
1 Enter the menu mode.
2 Press the SELECT button to choose the Configuration menu and
verify the following is displayed in the SDA:
3 Use the
↓
button to bypass the Inquiry , SCSI Address and Power-
Up State
menus and verify the following is displayed in the SDA:
4 With Auto Clean displayed on line #2 of the SDA, press the
SELECT button and verify the following is displayed in the SDA:
Note: Auto Clean Disabled
is the default. If you want to enable the automatic
cleaning, proceed to step 6. Otherwise, exit the menu mode.
5 With the desired option displayed on line #2, press the
SELECT
button.
6 Exit the menu mode.
Enabling/Disabling the
Retry Option
2
To enable or disable the retry option:
1 Enter the menu mode.
2 Press the SELECT button to choose the Configuration menu.
3 Verify the following is displayed in the SDA:
4 Use the
↓
button to bypass the
Inquiry
,
SCSI Address
,
Power-Up
State and the Auto Clean menus and verify the following is
displayed in the SDA:
M e n u : C o n f i g u r a t i
I n q u i r y
M e n u : C o n f i g u r a t i
A u t o C l e a n
M e n u : A u t o C l e a n
E n a b l e d
M e n u : C o n f i g u r a t i
I n q u i r y
M e n u : C o n f i g u r a t i
R e t r i e s