Quantum ACL 4/52, Руководство оператора

Страница: 32 / 68

Chapter 1 Library Overview
Operator Tasks (using the Menu Mode)
16 ACL 4/52 Operator’s Guide
Operator Tasks (using the Menu
Mode)
1
As an operator, you may need to use the configuration, drive control
and diagnostics menus.
Configuration Menu
Functions
1
The Configuration menu allows you to:
• Set or change the library’s SCSI address
• Set or change the tape drive SCSI addresses
• Define the state of the library after the power-up sequence has
completed
• Enable or disable the automatic drive cleaning option
• Enable or disable the retry operation option
• Enable or disable the automatic loading feature
• Set or change the language displayed in the SDA
• Adjust the SDA contrast level
Setting/Changing the Library’s SCSI Address
1
The SCSI address (0...7) of the library can be set using the
SCSI
Address/Robotics sub-menus.
Setting/Changing the Tape Drive SCSI Addresses
1
This function is used to set the SCSI address (0...7 for libraries with
DLT 2000 or DLT 4000 tape drives, and 0...15 for libraries with DLT
7000 tape drives) of each tape drive in the library. This can be done
through the
SCSI Address/ Drive n
sub-menus.
Defining the Library’s Power-Up State
1
You have the option of defining the starting condition of the library,
either on-line or standby (off-line), after power-up, self-tests and
initialization has occurred. The default is on-line. You can change it by
using the
Power-Up State sub-menu.
Enabling/Disabling Automatic Drive Cleaning
1
The automatic drive cleaning feature has two modes of drive cleaning
support: Host Initiated and Fully Automatic.