Quantum ACL 4/52, Руководство оператора

Страница: 30 / 68

Chapter 1 Library Overview
Menu Navigation
14 ACL 4/52 Operator’s Guide
Menu Navigation
1
After placing the library in the standby mode and pressing the
SELECT button on the control panel, the menu mode is activated.
To navigate through the menu, press the
↑
or
↓
buttons until the name
of the desired main menu is displayed on line #2 of the SDA, then
release the
SELECT
button.
Line #1 changes to the main menu selection and line #2 shows the first
sub-menu. Press the
SELECT button for the first sub-menu, or
continue pressing the
↑
or
↓
buttons until the sub-menu desired is
displayed. Pressing SELECT chooses the sub-menu and displays the
first option in line #2. Again, the operator must scroll through the
options list until the desired option is displayed. The operator selects
the option and it is executed.
An Exit option is provided at the end of each menu, sub-menu and
option list. When the operator chooses
Exit
, he/she are returned to the
previous menu. At that point, another procedure can be performed, or
the operator can scroll to the next
Exit
until completely exiting the
menu mode. The quickest way to exit the menu mode is to press the
SELECT
and
↑
or
↓
buttons simultaneously.
Note: After an operation is executed, the results displayed in the SDA must
be cleared before the quick method of exiting will be available. To clear
the results of an operation from the SDA, press the
↑
or
↓
button.
figure 11 on page 15 is an example of menu navigation. It shows the
commands and associated SDA displays involved in changing the
AUTO CLEAN
option from DISABLED (factory default) to ENABLED.