Quantum ACL 4/52, Руководство оператора

Страница: 34 / 68

Chapter 1 Library Overview
Operator Tasks (using the Menu Mode)
18 ACL 4/52 Operator’s Guide
• Unload a tape cartridge from a specific drive
• Clean a specific drive
Unloading a Tape
1
This feature allows you to unload the tape (preparing to eject and
remove the tape cartridge) in a drive that you specify. To perform this
function, use the
Unload
sub-menu. The options are:
Drive 0
,
Drive 1
,
Drive 2 , Drive 3, where:
Menu ModePhysical Location
Drive 0 = Top Drive
Drive 1
= Second Drive
Drive 2 = Third Drive
Drive 3
= Bottom Drive
Cleaning a Drive
1
This feature allows you to direct a cleaning tape cartridge to a tape
drive that you specify. To perform this function, use the
Clean sub-
menu. The options are:
Drive 0
,
Drive 1
,
Drive 2
,
Drive 3,
where:
Menu Mode Physical Location
Drive 0
= Top Drive
Drive 1 = Second Drive
Drive 2
= Third Drive
Drive 3 = Bottom Drive
Diagnostics Menu
Functions
1
You can use the Diagnostics menu to:
• Display the status of the library
• Perform an inventory of the library
Displaying the Library’s Status
1
There are two options concerning the status of the library. These
options allow you to display the current condition of each sensor and
the buttons in the library (
Status Sensor
) or display the position of the
four actuators (horizontal, vertical, extension and gripper) in the
library (
Status Actuator
). To display this information in the SDA, use
the Status Sensor (not currently supported) and Status Actuator sub-
menus and the
↑
and
↓
buttons to scroll through the returned
information.