UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9
User’s Guide 950/1523
10.3.2
ets mode
The ETS function is disabled by default. Only after enabling it, the ETS process also starts.
Syntax
ets mode {auto | on}
no ets mode
auto
– This command enables the DCBX ETS function
on
– This command enables ETS function.
no -
This command disables ETS function.
Default Setting
Disabled
Command Mode
Data-Center-Bridging Interface Mode
10.3.3
ets scheduler-type
This command configures the scheduler type for an interface. The scheduler type is WRR or WERR.
When the ETS is enabled, the default scheduler type is WERR.
Syntax
ets scheduler-type [wrr|werr]
no ets scheduler-type
WRR -
Set ETS scheduler type to WRR
WERR -
Set ETS scheduler type to WERR
no -
This command restores the scheduler type to WERR.
Default Setting
werr
Command Mode
Data-Center-Bridging Interface Mode
