UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9
User’s Guide 61/1523
Packets Received With Error:
The number of inbound packets that contained errors preventing
them from being deliverable to a higher-layer protocol.
Broadcast Packets Received:
The total number of packets received that were directed to the
broadcast address. Note that this does not include multicast packets.
Packets Transmitted Without Error:
The total number of packets transmitted.
Transmit Packets Errors:
The number of outbound packets that could not be transmitted because
of errors.
Collisions Frames:
The best estimate of the total number of collisions on this Ethernet segment.
Time Since Counters Last Cleared:
The elapsed time, in days, hours, minutes, and seconds since
the statistics for this port were last cleared.
This command displays detailed statistics for a specific port or for all CPU traffic based upon the
argument.
Syntax
show interface counters detailed {<slot/port> | port-channel <portchannel-id> | switchport}
<slot/port> -
is the desired interface number.
<portchannel-id>
-
is the desired port-channel interface number. The range of the port-channel ID is
1 to 64.
switchport -
This parameter specifies whole switch or all interfaces.
Default Setting
None
Command Mode
Privileged Exec
Display Message
The display parameters when the argument is ' <slot/port>' or port-channel are as follows:
Total Packets Received (Octets):
The total number of octets of data (including those in bad
packets) received on the network (excluding framing bits but including FCS octets). This object can
be used as a reasonable estimate of Ethernet utilization. If greater precision is desired, the
etherStatsPkts and etherStatsOctets objects should be sampled before and after a common interval.
The result of this equation is the value Utilization which is the percent utilization of the Ethernet
segment on a scale of 0 to 100 percent.
Packets Received 64 Octets:
The total number of packets (including bad packets) received that
were 64 octets in length (excluding framing bits but including FCS octets).
Packets Received 65-127 Octets:
The total number of packets (including bad packets) received
that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS
octets).
