Quanta Computer T1048-LB9 Скачать руководство пользователя страница 794

Страница: 794 / 1523

UANTA COMPUTER INC.

Layer 2/3/4 Managed Switch

_____________________________________________________________________________

LB9

User’s Guide 794/1523

8.2.1.4

show ip igmp interface membership

This command displays the list of interfaces that have registered in the multicast group.

Syntax

show ip igmp interface membership <multiipaddr> [detail]

< multiipaddr > -

A multicast IP address..

[detail] -

Display details of subscribed multicast groups.

Default Setting

None

Command Mode

Privileged Exec

User EXEC

Display Message

Iinterface:

Valid slot and port number separated by forward slashes.

Interface IP:

This displays the IP address of the interface participating in the multicast group.

State:

This displays whether the interface has IGMP in Querier mode or Non-Querier mode.

Group Compatibility Mode:

The group compatibility mode (v1, v2 or v3) for the specified group on

this interface.

Source Filter Mode:

The source filter mode (Include/Exclude) for the specified group on this

interface. This is “-----” for IGMPv1 and IGMPv2 Membership Reports.

If detail is specified, the following fields are displayed:

Interface:

Valid slot and port number separated by forward slashes.

Group Compatibility Mode:

The group compatibility mode (v1, v2 or v3) for the specified group on

this interface.

Source Filter Mode:

The source filter mode (Include/Exclude) for the specified group on this

interface. This is “-----” for IGMPv1 and IGMPv2 Membership Reports.

Source Hosts:

This displays the list of unicast source IP Addresses in the group record of the

IGMPv3 Membership Report with the specified multicast group IP Address. This is “-----” for IGMPv1
and IGMPv2 Membership Reports.

Expiry Time:

This displays the amount of time remaining to remove this entry before it is aged out.

This is “- ----” for IGMPv1 and IGMPv2 Membership Reports.

Содержание T1048-LB9




















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание T1048-LB9

Отзывы:

Бренды по названию

Популярные бренды

Quanta Computer T1048-LB9, Руководство пользователя

Результаты поиска

Содержание T1048-LB9

Отзывы:

Бренды по названию

Популярные бренды