UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9
User’s Guide 344/1523
6.8.1.29
show radius servers
This command is used to display items of the configured RADIUS servers.
Syntax
show radius servers [{<ipaddr | ipv6addr | hostname> | name <servername>}]
Default Setting
None
Command Mode
Privileged Exec
Display Message
RADIUS Server Name:
The Name of the authenticating server.
RADIUS Server IP Address:
The IP address or host name of the authenticating server.
Current Server IP Address:
The ‘*’ symbol preceeding the server host address specifies that the
server is currently active.
Number of Retransmits:
The configured value of the maximum number of times a request packet is
retransmitted.
Timeout Duration:
The configured timeout value, in seconds, for request re-transmissions.
RADIUS Accounting Mode:
A global parameter to indicate whether the accounting mode for all the
servers is enabled or not.
RADIUS Attribute 4 Mode:
A global parameter to indicate whether the NAS-IP-Address attribute
has been enabled to use in RADIUS requests.
RADIUS Attribute 4 Value:
A global parameter that specifies the IP address to be used in the
NAS-IP-Address attribute to be used in RADIUS requests.
RADIUS Attribute 95 Mode:
A global parameter to indicate whether the NAS-IPv6-Address attribute
has been enabled to use in RADIUS requests.
RADIUS Attribute 95 Value:
A global parameter that specifies the IPv6 address to be used in the
NAS-IP-Address attribute to be used in RADIUS requests.
Port:
The port in use by this server
Type:
Primary or secondary
Secret Configured:
Yes / No
Message Authenticator:
The message authenticator attribute configured for the radius server.
