Quadstick FPS, Руководство пользователя

Страница: 72 / 94

◦
By default, the Bluetooth module is disabled and powered down when the Device mode is set to
“none”. In QMP, the Misc tab contains fields for the three settings:
In a Preferences configuration file for non-QMP users, these parameters would be:
bluetooth_device_mode ssp Bluetooth HID Device Selection
bluetooth_authentication_mode 2 Bluetooth Authentication Selection
bluetooth_connection_mode pair Bluetooth pairing control
bluetooth_throttle 15 ms Bluetooth mouse report interval in ms.
The bluetooth_throttle parameter controls how often the Quadstick sends mouse or game
controller data over the Bluetooth channel. If updates are sent more quickly than the channel
can deliver them to the host, the user may experience lag and run-on of the mouse pointer.
Increase the interval if this occurs. Also reducing the number of competing Bluetooth devices
or separating the Bluetooth radios from any nearby WiFi devices may improve throughput.
The connection mode for PCs is almost always “pair” and the Auth mode is usually 2 or 4. Try 2
first. If 4 is used, if prompted for a pairing code, use “1234”.
When changing the Device mode from one type of device to another, like from mouse to combo,
it may be necessary to first un-pair the Quadstick from its host, then re-pair it, before the new
device type will be functional.
The Bluetooth settings need to take effect upon power up, so they must reside in the prefs.csv
file.
Serial communication:
Voice commands and remote file management by the QMP can utilize the Bluetooth serial
connection. Alternatively, the IN port on the back of the Quadstick, normally used as a switch
input, can be used as a physical serial connection with a
FTDI, Future Technology Devices
International Ltd TTL-232R-3V3-AJ cable, if the Bluetooth serial connection is not available.
The Quadstick Manager program will automatically search for any available serial connection to
the Quadstick at startup.
Wireless only operation:
72