manualshive.com logo in svg

quadient DS-200iQ, Руководство пользователя, Страница: 78 / 130

Поделиться
Скачать
quadient DS-200iQ Скачать руководство пользователя страница 78

72

JUN 2020

USER GUIDE

5

OPERATOR INSTRUCTIONS

DS-200iQ / DS-600iQ

  

REV 00

5.1.4 

PAPER CONTROL ADJUSTMENT

The Paper Control lever on the collate clam is used to help control skewing and hold 

packs down, and can be adjusted to suit single sheets, lightweight documents, and 

different packs or inserts of varying thickness.

1.  Raise the Insert Head perspex top cover to access the collate clam as shown 

in Figure 5.29. 

QTL-RND-OPS-00000131-A-00

Figure 5.29  –  Raising the Insert Head perspex top cover

2.  The paper control lever can be adjust according to the following:

 

▪

Upwards

 (towards exit) - For thick packs or if lightweight prime 

documents are struggling to get into the collate pocket.

 

▪

Downwards

 - For single sheets or inserts of varying thickness.

NOTE:

The lever can also be set halfway. For best results, adjust according to the 

required job being processed.

3.  Adjust the paper control lever according to the job requirements as shown in 

Figure 5.30.

QTL-RND-OPS-00000132-A-00

Figure 5.30  –  Adjusting the paper control lever

4.  Lower the perspex top cover of the Insert Head back down once the desired 

adjustment has been made.

Содержание DS-200iQ



































































































































Отзывы:

Нет отзывов