quadient DS-200iQ Скачать руководство пользователя страница 130

Страница: 130 / 130

124

JUN 2020

USER GUIDE

DISPOSAL INSTRUCTIONS

DS-200iQ / DS-600iQ

REV 00

9.1

END OF LIFE

The objectives of the European Community’s environment policy are, in particular, to

preserve, protect and improve the quality of the environment, protect human health

and utilise natural resources prudently and rationally.

That policy is based on the precautionary principle and principles that preventive

action should be taken, that environmental damage should as a priority be rectified at

the source.

Separate collection of waste is the precondition to ensure reuse and recycling of waste

that is generated at the disposal of electrical or electronic equipment and is necessary

to achieve the chosen level of protection of human health and the environment within

the European Community (EC).

More particularly, certain materials and components of electrical waste, and electronic

equipment need selective treatment as their injudicious handling or disposing of on or

into land, water, or air would represent a major threat to the environment and human

health.

In order to facilitate collection and treatment separated from normal domestic waste,

electrical and electronic equipment is marked with the following WEEE Directive logo:

QTL-RND-MSC-00000032-A-00

▪

Do not mix with normal domestic waste.

▪

Please use the sub-joined return or collection system dedicated to the

disposal of electrical and electronic waste.

▪

Equipment produced after August 13 2005.

Not only are you by law not allowed to dispose of the waste equipment via other

waste-streams, but we encourage you to actively contribute to the success of such

collection and to the common good and better quality of life of present and future

generations.

For more information on the correct disposal of this product please contact your local

dealer.

Содержание DS-200iQ



































































































































Результаты поиска

Содержание DS-200iQ

Отзывы:

quadient DS-200iQ, Руководство пользователя, Страница: 130 / 130

Результаты поиска

Содержание DS-200iQ

Отзывы: