quadient DS-200iQ Скачать руководство пользователя страница 59

Страница: 59 / 130

JUN 2020

USER GUIDE

OPERATOR IMOS SETTINGS

DS-200iQ / DS-600iQ

REV 00

4.7.4

PRINTER OUTPUT SETTINGS

If a Printer is fitted, first enter the ‘

Flexmail master script name

’ being used,

via the on-screen keypad, then press ‘

’ as shown in Figure 4.30.

QTL-RND-SCR-00000089-A-00

Figure 4.30 – Entering the Flexmail master script name

The following Printer Scripting modes are available:

▪

Pass through/no printing

- Mail-pieces continue unprinted to the Franker or

Conveyor.

▪

Mailshot/sequential

- Mail-pieces will be printed with data supplied by

Flexmail database in a sequential order from top to bottom.

▪

Matching/DB lookup

- Mail-pieces will be printed with data read from the

column in the Flexmail database named under the ‘

Lookup

’ option in the Edit

Printer Settings dialog box.

NOTE:

The name entered must be the same as the column in the Flexmail database.

▪

Mailshot/sequential (non-reset)

- Setting is the same as ‘

Mailshot sequential

’

but if the machine is Autoended, then switched back on, it will continue where

it left off in the database. Without non-reset, the machine will restart at the

first entry.

▪

Matching/Dynamic DB lookup

- Setting is the same as ‘

Matching/DB lookup

’

except the database is not located locally on the Flexmail PC, but accessed

remotely via AIMS.

▪

Mailshot/Dynamic Sequential

- Setting is similar to ‘

Matching/Dynamic

DB lookup

’ with the exception that it does not match a Piece ID in AIMS to a

Piece ID read at the input of the machine. Any addresses that are assigned to

Mail-pieces and then removed from the machine, get re-assigned to the next

available mail-piece.

2. Select the required ‘

Scripting mode

’, then press ‘

’ as shown in Figure 4.31.

QTL-RND-SCR-00000090-A-00

Figure 4.31 – Scripting mode settings

Содержание DS-200iQ



































































































































Результаты поиска

Содержание DS-200iQ

Отзывы:

quadient DS-200iQ, Руководство пользователя, Страница: 59 / 130

Результаты поиска

Содержание DS-200iQ

Отзывы: