quadient DS-200iQ Скачать руководство пользователя страница 12

Страница: 12 / 130

JUN 2020

USER GUIDE

INTRODUCTION

DS-200iQ / DS-600iQ

REV 00

2.1

GENERAL OVERVIEW

The DS-200iQ / DS-600iQ machine is a high-volume Inserter/Folder. It is of modular

construction and as a basic configuration it consists of an Insert Head, with a feeding

unit fitted such as a Versatile Feeder or a Flex Folder.

Other configurations may include multiple Versatile Feeder units, with output units also

fitted such as an Output Conveyor, Output Sorter, and or Turner.

2.2

FUNCTIONAL OVERVIEW

The function of the DS-200iQ / DS-600iQ machine is to fold forms to ‘C’, ‘Z’, ‘V’ or

double forward fold, either separately, in fixed multiples or in varying groups.

Enclosures such as inserts, reply envelopes etc. may be added.

Folded forms and enclosures are collated in the collation area in the Insert Head

before insertion into the envelope. Forms may be inserted without sealing the envelope

for subsequent checking or hand insertion.

NOTE:

Unfolded forms and enclosures may also be collated before insertion into C4

envelopes.

Batch processing functions allows a pre-set number of cycles to be completed before

the machine automatically stops.

Barcode/2D/OMR (with a number of barcode symbologies) are compatible for use

with a mark-reading Versatile Feeder or Flex Folder, allowing a group of forms to be

collated on the track prior to folding.

The DS-200iQ / DS-600iQ is equipped with a PC controlled Integrated Mail Operating

System (IMOS), and is accessed via touch-screen monitor or keyboard/mouse

from where jobs can be programmed and run. The number of jobs that can be

programmed is limited only by the capacity of the PC.

A daily mail function can be used as an optional feature on a Versatile Feeder or Flex

Folder and allows groups of documents (stapled or loose) to be hand-fed; they will

then be folded and inserted into an envelope (Flex Folder only).

If other hoppers are loaded, further forms can be collated.

No manual setting of the fold plates or envelope closer is required, as these are

adjusted automatically according to the settings within IMOS.

The DS-200iQ / DS-600iQ machine may consist of a number of module units,

depending upon the machine build ordered - these units are listed below:

▪

Insert Head

▪

Versatile Feeder

▪

Flex Folder

▪

Output Conveyor

▪

Output Sorter

▪

Turner

2.3

OVERVIEW OF COMPONENTS

An overview of the main components of the DS-200iQ / DS-600iQ are identified in the

Figure 2.1.

QTL-RND-GEN-00000105-A-00

Figure 2.1 – DS-200iQ / DS-600iQ main components

Содержание DS-200iQ



































































































































Результаты поиска

Содержание DS-200iQ

Отзывы:

quadient DS-200iQ, Руководство пользователя, Страница: 12 / 130

Результаты поиска

Содержание DS-200iQ

Отзывы: