quadient DS-200iQ Скачать руководство пользователя страница 64

Страница: 64 / 130

JUN 2020

USER GUIDE

OPERATOR INSTRUCTIONS

DS-200iQ / DS-600iQ

REV 00

Adjustments to the conveyor backrest may also be needed to suit the envelope size

being processed.

4. Adjust the position of the conveyor backrest by lifting the backrest

adjustment handle upwards and then sliding the backrest along the conveyor

into the required position (dependant on the stack size of envelopes) towards

the hopper feed entry point as shown in Figure 5.3.

QTL-RND-OPS-00000111-A-00

Figure 5.3 – Adjusting the position of the conveyor backrest

5. Release the backrest adjustment handle to lock the conveyor backrest into

position once the desired adjustment has been made.

NOTE:

Once feeding begins, the backstop should be left in its pulled back state and

let the conveyor move the envelopes forward towards the pickup rollers.

6. Adjust the conveyor backrest angle to suit the following envelope sizes:

▪

C4/C5

- Backrest angle should be fully raised for C4 and C5 sized

envelopes

▪

DL/DL+

- Backrest angle should be fully lowered for DL and DL+

sized envelopes

7. Loosen the thumb knobs on each side of the conveyor backrest as shown in

Figure 5.4 and adjust accordingly.

QTL-RND-OPS-00000112-A-00

Figure 5.4 – Adjusting the conveyor backrest angle

Re-tighten the thumb screw knobs on both sides once the final adjustments

have been made.

If envelopes feed erratically, try adjusting the backrest angle in-

between fully raised and lowered positions.

Содержание DS-200iQ



































































































































Результаты поиска

Содержание DS-200iQ

Отзывы:

quadient DS-200iQ, Руководство пользователя, Страница: 64 / 130

Результаты поиска

Содержание DS-200iQ

Отзывы: