QNAP TS-110, Руководство пользователя программного обеспечения

Страница: 238 / 369

238
Real-time Remote Replication (RTRR) provides real-time or scheduled data replication
and one-way and two-way data synchronization between two locations (such as a
local NAS and a remote NAS, local NAS and an FTP server, or local NAS and an external
drive, or replication between two local folders.) In real-time mode, the source folder will
be monitored and any files that are new, changed, and renamed will be immediately
replicated to the target folder. In scheduled mode, the source folder will be replicated
to the target folder according to the pre-defined schedule.
One way synchronization refers to data synchronization from the source to the
destination, while two-way synchronization means both the source and destination are
synchronized after new files are copied in either side or files stored on either side are
changed or deleted.
If the backup destination is a NAS, the RTRR server ("Main Menu" > "Backup Station" >
"RTRR Server") or FTP service must first be enabled ("Main Menu" > "Control Panel" >
"Network Services" > "FTP") on the remote NAS.
NAS models Firmware Maximum number of
replication jobs
supported
x86-based NAS Prior to v3.5.0 64*
v3.5.0 or above 32*
ARM-based NAS Prior to v3.5.0 RTRR replication not
supported.
v3.5.0 or above 8*
*Each job supports up to 16 folder pairs.
If your NAS models are not listed here, visit http://www.qnap.com for more details.
x86-based NAS TS-x39 series, TS-x59 series, TS-x69 series, TS-
509, TS-809, TS-809 Pro, TS-809U-RP, SS-439
Pro, SS-839 Pro, TS-x59 Pro+, TS-879 Pro, TS-
1079 Pro, TS-879U-RP, TS-EC879U-RP, TS-1279U-
RP, TS-EC1279U-RP
ARM-based NAS TS-x10, TS-x12, TS-x19 series