159
3. Enter the domain name of the domain name service (DNS.) The NetBIOS name will
be automatically generated when you enter the domain name. Specify the DNS
server IP for domain resolution. The IP must be the same as the DNS server of your
Active Directory. Click "Next".
4. Select a domain controller from the drop-down menu. The domain controller is
responsible for time synchronization between the NAS and the domain server and
user authentication. Enter the domain administrator name and password. Click
"Join".
5. Upon successful login to the domain server, the NAS has joined to the domain. Click
"Finish" to exit the wizard.
6. Go to "Privilege Settings" > "Users" or "User Groups" to load the domain users or user
groups to the NAS.
Windows 2003
The AD server name and AD domain name can be checked in "System Properties" in
Windows. As an example, for Windows 2003 servers, if you see "node1.qnap-test.com"
as the "Full computer name" on the system properties dialog window, the AD server
name is "node1" and NOT "node1.qnap-test.com" and the domain name remains the
same as qnap-test.com.
Windows Server 2008
Check the AD server name and domain name in "Control Panel" > "System" in Windows.
In the system dialog window, the AD server name will appear as the computer name
and the domain name can be found in the domain field.
Note :
After joining the NAS to the Active Directory, the local NAS users who have
access rights to the AD server should use "NASname\username" to login. AD
users should use their own usernames to login to the AD server.
For TS-x09 series NAS, if the AD domain is based on Windows 2008 Server, the
NAS firmware must be at least version 2.1.2.
Windows 7
If you are using a Windows 7 PC that is not a member of an Active Directory, while
your NAS is an AD domain member and its firmware version is earlier than v3.2.0,
change your PC settings as shown below to allow your PC to connect to the NAS:
1. Go to "Control Panel" > "Administrative Tools".
Содержание TS-110
