QNAP TS-110, Руководство пользователя программного обеспечения

Страница: 17 / 369

17
LE D C olor LE D Sta tus De s c ription
* e Off No eSATA device can be detected.
*The 10 GbE network expansion function is only supported by the TS-470 Pro, TS-670
Pro, TS-870 Pro, TS-870U-RP, TS-879 Pro, TS-1079 Pro, TS-879U-RP, TS-1270U-RP,
TS-1279U-RP, TS-EC879U-RP, and TS-EC1279U-RP.
**TS-210, TS-212, TS-219, TS-439U-SP/RP, TS-809 Pro, TS-809U-RP do not support
eSATA port.
1
This feature is only supported by certain NAS models. Visit http://www.qnap.com for
more details.
Ala rm B uzze r
The alarm buzzer can be disabled in "Control Panel" > "System Settings" > "Hardware" > "
Buzzer".
B e e p s ound No. of
Tim e s
De s c ription
Short beep
(0.5 sec)
1 1) The NAS is starting up.
2) The NAS is being shut down (software
shutdown).
3) The user presses the reset button to reset the
NAS.
4) The system firmware has been updated.
Short beep
(0.5 sec)
3 The NAS data cannot be copied to the external
storage device from the front USB port.
Short beep
(0.5 sec),
long beep
(1.5 sec)
3, every 5
min
The system fan is out of function (TS-119 does not
support smart fan.)
Long beep
(1.5 sec)
2 1) The disk volume is going to be full.
2) The disk volume has reached its full capacity.
3) The hard disk drives on the NAS are in degraded
mode.
4) The user starts hard drive rebuilding.