QNAP TS-110, Руководство пользователя программного обеспечения

Страница: 248 / 369

248
pressing the "Copy" button. Imported files will be stored in "SmartImport," a newly-
created folder, under the default backup directory. During each import, only new
photos and videos will be imported to a new folder.
USB O ne Touc h C opy
For customized backup configuration, please select "USB One Touch Copy."
Backup direction: From the front USB drive to the NAS or vice versa.
Backup method:
o
Create directory: A new directory will be created on the destination and the
source data will be copied to this directory. The new directory will be named as
the backup date (YYYYMMDD). If there are two or more backups on the same
day, the directory will be named with YYYYMMDD-1, YYYYMMDD-2... and so on.
o
Copy: Back up data to the destination share. If the same file exists, the
destination file will be overwritten.
o
Synchronize: Back up data to the destination share and clear the redundant
files. If the same file exists, the destination file will be overwritten.
Handle sparse files efficiently: A sparse file is a type of computer file that contains
large blocks of zero-byte data. Turn on this option may reduce the time required for
backup.
Source and destination folders: Specify the folder pairs for backup and click "Add".
Maximum 9 folder pairs can be added.
Options: Click "Options" to set up notification of the backup jobs by email, SMS, or
instant messaging (IM).
Unmount the front USB drive manually: When enabled, users can press the Copy
button for about 8–10 seconds until the USB LED light turns off and remove the
front USB drive from the NAS.
Enable the alarm buzzer:
o
One short beep: Backup has started.
o
Two short beeps: The front USB drive is being unmounted.
Note : If there are multiple partitions on the source storage device, a new folder will
be created for each partition on the destination as the backup folder. The backup
folder will be named with the backup date and the partition number (YYYYMMDD-1
for partition 1, YYYYMMDD-2 for partition 2, etc). If the source storage device only
contains one partition, the backup folder will be named YYYYMMDD.
Da ta c opy us ing front USB port