QNAP TS-110, Руководство пользователя программного обеспечения

Страница: 93 / 369

93
NAS can join a VLAN and be configured as a backup storage of other devices on the
same VLAN.
To join a VLAN, select "Enable VLAN" and enter the VLAN ID (a value between 0 and
4094.) Keep the VLAN ID safe and make sure the client devices are able to join the
VLAN. If you forget the VLAN ID and cannot connect to the NAS, you will need to reset
the network settings by pressing the NAS reset button. Once the NAS is reset, the VLAN
feature will be disabled. If the NAS supports two Gigabit LAN ports and only one network
interface is configured to enable VLAN, you can also connect to the NAS via the other
network interface.
Note : The VLAN feature is only supported by x86-based NAS models.
DH C P Se rv e r
A DHCP (Dynamic Host Configuration Protocol) server assigns IP addresses to clients on a
network. Select "Enable DHCP Server" to set the NAS a DHCP server if there are none on
the local network where the NAS is located.
Note :
Do not enable DHCP server if there is one on the local network to avoid IP address
conflicts or network access errors.
The DHCP server option is only available to Ethernet 1 when both LAN ports of a
dual LAN NAS are connected to the network and configured as standalone IP
settings.
Sta rt IP, E nd IP, Le a s e Tim e : Set the range of IP addresses allocated by the NAS
to the DHCP clients and the lease time. The lease time refers to the time that an IP
address is leased to the clients. During that time, the IP will be reserved to the
assigned client. When the lease time expires, the IP can be assigned to another
client.
WINS Se rv e r (optiona l): WINS (Windows Internet Naming Service) resolves
Windows network computer names (NetBIOS names) to IP addresses, allowing
Windows computers on a network to easily find and communicate with each other.
Enter the IP address of the WINS server on the network if available.
DNS Suffix (optiona l): The DNS suffix is used for resolution of unqualified/
incomplete host names.
TF TP Se rv e r & B oot F ile (optiona l): The NAS supports PXE booting of network