3. Installation and Configuration
This chapter provides specific hardware and firmware installation and configuration steps.
Hardware Installation
This section provides information on installing drives.
Drive Installation
The KoiBox-100W is compatible with 2.5-inch hard drive and 2.5-inch solid-state drives.
Installing a 2.5-inch Hard Drive or Solid-State Drive
Warning
• Installing a drive deletes all data on the drive.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
1. Power off the device.
2. Disconnect all cables.
3. Remove the case cover.
a. Turn the device upside down.
b. Remove the screws.
KoiBox-100W User Guide
Installation and Configuration
10