QMS 2060, Дополнительное руководство

Страница: 85 / 160

$ERXW+DUG
'LVNV
6WRUDJHDQG6FDQQLQJ'HYLFHV
([DUG'LVNV
For information on attaching an external SCSI hard disk, an Iomega
Jaz drive, or an Iomega Zip drive, see the documentation that comes
with the device.
See FAQ 7181 for a list of each QMS-approved hard disk, its manu-
facturers and part numbers, and the QMS products on which it can be
used. You can access QMS FAQs through the Internet at
http://www.qms.com/support/supportbase/ or through Q-FAX (see
appendix A, “QMS Customer Support,” to find out how to access Q-
FAX documents).
» Note: FAQ numbers may be subject to change, so you may want to
obtain a directory of Q-FAX documents before requesting a specific
document.
,GHQWLI\LQJ+DUG'LVNV
Hard disks, Jaz drives, and Zip drives are identified by their device
numbers. If an internal hard disk is installed, it has a device number of
DSK7. If optional external hard disks are attached to the printer, their
device numbers can range from DSK0 to DSK6. (DSK5, which trans-
lates to SCSI ID 5, is reserved for the CrownCopy option). Device
numbers of external disks can be set on the back of the hard disk by
the installer.
» Note: If the internal hard disk is removed or an external hard disk is
not turned on, the printer does not reset non-volatile RAM to the
factory defaults.