QMS 2060, Дополнительное руководство

Страница: 16 / 160

Reinstalling the
Controller
Board
QMS 2060 Print System Options 2-4
3 Remove the controller board.
Using both hands, grab the two screws (on the metal mounting
bracket cover), slide the controller board out of the printer, and
set-it aside on a flat surface.
Reinstalling the Controller
Board
The controller board must be reinstalled after installing the following
options: a SIMM upgrade, an internal hard disk, a Kanji font SIMM, an
optional network LocalTalk or serial interface, and a 1200x1200 dpi
Multi-Res daughterboard.
M
WARNING
!
The options which require access to the controller board
should be performed only by a qualified QMS service technician.
ACHTUNG! Arbeiten am QMS Controller sollten nur von
qualifiziertem Servicepersonal durchgeführt werden.
Procedure
Use the following procedure to reinstall the controller board.
s
Caution: It's very important to protect the printer controller board
from electrostatic damage. Please review the anti-static caution in
“Removing the Controller Board” on page 2-2.