32
ENGLISH
Initial Configuration
Example of TFTP Server Screen
Figure 4-8:
The switch supports two images. This is to ensure that if one image file fails, another backup
4.
is ready for use. Use the “dir” command to check if the image files exist. If the switch already
contains 2 images, you need to remove one of the images and use the “
delete <image name>
”
command to delete the non-startup image.
Delete Image Screen Sample
Figure 4-9:
Input the following command to update the image:
5.
“
copy tftp://<server ip addr>/<file name> image <file name>
”.
Update Image Screen Sample
Figure 4-10:
10.0.10.5
Input the following command to set the new image as the “next boot” image:
6.
“
boot-system opcode <file name>
”.
Set Boot Image Success Screen Sample
Figure 4-11:
Reboot the switch.
7.
After the system boots up, input “show version” to display and verify the updated version.
8.
