6
ENGLISH
Safety and Regulatory Information
Power Cord Warnings
1.4.6
If an AC power cord was not provided with your product, purchase one that is approved for use in your
country.
CAUTION:
To avoid electrical shock or fire, check the power cord(s) that will be
used with the product as follows:
Do not attempt to modify or use the AC power cord(s) if they are not
•
the exact type required to fit into the grounded electrical outlets.
The power cord(s) must meet the following criteria: The power
•
cord must have an electrical rating that is greater than that of the
electrical current rating marked on the product.
CAUTION:
The power cord must have safety ground pin or contact that is suitable
for the electrical outlet.
CAUTION:
The power supply cord(s) is/are the main disconnect device to AC
power. The socket outlet(s) must be near the equipment and readily
accessible for disconnection.
CAUTION:
The power supply cord(s) must be plugged into socket outlet(s) that is/
are provided with a suitable earth ground.
System Access Warnings
1.4.7
CAUTION:
To avoid personal injury or property damage, the following safety
instructions apply whenever accessing the inside of the product:
Turn off all peripheral devices connected to this product.
•
Disconnect the AC power by unplugging all AC power cords from the
•
system or wall outlet.
Disconnect all cables and telecommunication lines that are
•
connected to the system.
Retain all screws or other fasteners when removing access cover(s).
•
Upon completion of accessing inside the product, refasten access
cover with original screws or fasteners.
Do not access the inside of the power supply. There are no
•
serviceable parts in the power supply. Return to the manufacturer for
servicing.
Power down the switch and disconnect all power cords before
•
adding or replacing any non hot-plug component.
When replacing a hot-plug power supply, unplug the power cord to
•
the power supply being replaced before removing the power supply
from the switch.
