22
ENGLISH
Hardware Installation
To install an SFP+ module, do the following:
Slide the SFP+ module into an SFP+ port.
1.
Connect SFP+ Module
Figure 3-7:
Push completely until the module locks into place.
2.
Repeat the above procedures to install additional SFP+ modules.
3.
The SFP+ port LED lights green when the network link is established.
NOTE:
SFP+ modules are not included in the package. Contact your dealer to purchase.
Connect to Console Port
3.6
The console port is used for setting up and managing the switch via a connection to a console terminal
or PC using a terminal emulation program. You can connect the switch to a terminal or PC using the
supplied console cable (RJ-45 male to RS-232 female cable) for serial communication.
Below is the console cable wiring specification table:
RJ-45 Port
of Switch
DB9 Female Port
of PC
Abbreviation
Description
3
2
RD
Received Data
6
3
TD
Transmit Data
1
8
CTS
Clear To Send
8
7
RTS
Request To Send
5
5
GND
Ground
