5
Copyright © Puretec Pty Ltd 2020
SOL-TA Commercial Series User Guide
Before Installation
Professional Installation Required
•
Installation requires shutting water off to home, cutting home water supply pipe
and using a welding torch to add piping and fittings. Specialised tools and skills are
required, this must be completed by a qualified tradesperson.
Make Sure Your Water Has Been Thoroughly Tested
•
An analysis of your water should be made prior to the selection of your water
conditioning equipment. Your dealer will generally assist with this service for
you, and may send a sample to an independent laboratory for analysis and
recommendations. Enter your analysis information on page 4 for your permanent
record.
•
Softeners are designed to reduce hardness but can handle reasonable amounts
of soluble iron if consideration is given when selecting model and regeneration
settings. For best results contact Puretec to discuss.
Install Water Conditioning Equipment Correctly
Select the location of your water softener with care. Various conditions which contribute
to proper location are as follows:
•
Install as close as possible to a drain.
•
Install in correct relationship to other water treatment equipment. Contact Puretec
for assistance.
•
Install the softener in the supply line BEFORE the water heater. Temperatures above
43.3°C (110°F) will damage the softener and void the warranty.
•
DO NOT install the softener in a location where freezing temperatures occur.
Freezing may cause permanent damage and will also void the warranty.
•
DO NOT install where water hammer conditions may occur without installing an
arrestor.
•
Allow sufficient space around the installation for easy servicing. Provide a non-
switched 240V power source for the control valve.
Before Installation
Содержание SOL-TA Series
Страница 32: ......
