Puretec SOL-TA Series, Руководство пользователя

Страница: 3 / 32

3 Copyright © Puretec Pty Ltd 2020 SOL-TA Commercial Series User Guide
Puretec Customer Service
Puretec Customer Service
Thank you for purchasing a Puretec Twin Alternating Water Softening System. Your
system is a proven performer manufactured from only quality materials and components.
It will give years of reliability and trouble free operation if maintained properly.
This user guide is designed for Puretec SOL-TA Water Treatment Systems. Be careful to
ensure the information and illustration is applicable to your particular unit.
If you require any assistance, please contact our Customer Service Helpline 1300 140 140
(Australia) 0800 130 140 (New Zealand).
Caution: Do not use with water that is microbiologically unsafe or without
adequate disinfection before or after the system.
The systems are designed for metropolitan supply water but can be used in other
situations. For other types of water supply, please contact your local Puretec dealer.
Puretec Water Softeners are designed to run economically for many years, dependent on
the initial installation and periodic maintenance.
Flush system for 5 minutes or more, after any period of non-use, more than 2 weeks.
Note: For point of entry installations an approved dual check backflow prevention device
must be installed.
When line pressure exceeds 500 kPa, a pressure limiting valve must be installed.
Note: Water softener salt not supplied.
Installation Note: A water filter system/tap, like any product, has a limited life and may
eventually fail. Also sometimes failure happens early due to unforeseen circumstances.
To avoid possible property damage, this product should be regularly examined for
leakage and/or deterioration and replaced when necessary. A drain pan, plumbed to an
appropriate drain or outfitted with a leak detector, should be used in those applications
where any leakage could cause property damage, and/or the water supply should be
turned off if no one is home/present.
INSTALLATION MUST BE COMPLETED BY A LICENCED PLUMBER. FAULTY OPERATION DUE TO
UNQUALIFIED PERSONS WILL RESULT IN VOIDED WARRANTY COVERAGE.
Warning:
Chlorine (free chlorine) tolerance is 0.5ppm - high chlorine levels permanently
damage the softening resin & is not covered under warranty. If chlorine exceeds this
limit, we recommend a carbon pre-filter such as the WH2 or CFS Series. Please refer to
Puretec for a specific recommendation. In any case, a carbon pre-filter is recommended
to protect against chlorine spikes & prolong the resin life.