DIAMENTOR E2
For Your Safety
D651.131.00/05 en
7
WARNING
Shock Hazard –
Strictly observe the following
warnings. Failure to do so may endanger the
lives of the patient, the user and other persons
involved.
Use of peripheral devices:
−
Peripheral devices (PC, printer) may only be
connected if they meet the requirements of
IEC 60950-1 / UL 60950-1 or of standard
IEC 60601-1 ANSI/AAMI ES 60601-1 /
CAN/CSA-C22.2.No.60601-1.
These devices may only be operated in the
patient environment, if it is guaranteed that
they meet the requirements of IEC 60601-1/
ANSI/AAMI ES 60601-1 /
CAN/CSA-C22.2.No.60601-1.
−
Devices may be connected to other devices
or to parts of systems only if it has been as-
certained that this connection does not im-
pair the safety of the patient, the operator or
the environment.
−
If the device specifications do not contain in-
formation as to connecting the device to
other equipment, you must consult the
manufacturer of the other equipment or an
expert about the effects of the connection on
the patient, the operator or the environment.
−
Always observe standards IEC
60601-1/
ANSI/AAMI ES 60601-1 /
CAN/CSA-C22.2.No.60601-1.
WARNING
Suffocation Hazard –
Dispose of the packag-
ing material, observing the applicable waste-
control regulations. Keep the packaging mate-
rial out of children's reach
.
Patient Hazard –
The product is a medical
electrical device and must only be handled by
persons who are trained in the use of such
equipment and are capable of applying it prop-
erly. The operator must be trained in the use of
the device.
Risk of Poisoning –
Chemicals required for
application or maintenance of the device, for in-
stance, must under all circumstances be stored,
prepared, and kept at hand in their specific con-
tainers. Failure to observe this instruction may
result in severe consequences for the patient.
WARNING
Equipment failure -
Electromagnetic fields are
capable of interfering with the proper perform-
ance of the device.
−
The DIAMENTOR E2 should not be used in
the immediate vicinity of or placed on top of
or below other equipment. However, if the
application requires an arrangement of de-
vices as described above, the
DIAMENTOR E2 should be watched to en-
sure its proper functioning in the specific ar-
rangement.
−
The customer or user of the
DIAMENTOR E2 should assure that it is
used in an electromagnetic environment as
described in IEC 60601-1-2.
