DIAMENTOR E2
Electromagnetic Compatibility (EMC) according to IEC 60601-1-2 / Special Adjustments
28
D651.131.00/05 en
13 Electromagnetic Compati-
bility (EMC) according to
IEC 60601-1-2
WARNING
Equipment failure!
The use of cables longer than the specified
ones can lead to a deterioration of the electro-
magnetic compatibility of the DIAMENTOR E2.
WARNING
Equipment failure!
The DIAMENTOR E2 should not be used in
immediate proximity to other devices, or while
stacked with other devices. Should this be nec-
essary, the DIAMENTOR E2 should be ob-
served in order to ensure operation according to
prescribed conditions and regulations.
Guidance and Manufacturer’s Declaration – Electromagnetic Emissions
The DIAMENTOR E2 is intended for use in the electromagnetic environment specified below.
The customer or the user of the DIAMENTOR E2 should assure that it is used in such an environment.
Emissions Test
Compliance
Electromagnetic Environment – Guidance
Radio-Frequency Emis-
sions
IEC/CISPR 11
Group 1
The DIAMENTOR E2 uses RF energy only for its inter-
nal function. Therefore, its RF emissions are very low
and are not likely to cause any interference in nearby
electronic equipment.
Radio-Frequency Emis-
sions
IEC/CISPR 11
Class B
Harmonic emissions
IEC 61000-3-2
complies
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
complies
The DIAMENTOR E2 is suitable for use in all estab-
lishments, including domestic establishments and those
directly connected to the low-voltage power supply net-
work that supplies buildings used for domestic pur-
poses.
1
1
The DIAMENTOR E2 fulfils the requirements of IEC/CISPR 11 Class B, anyhow according to its intended use it is not for
operation in domestic establishments.
